DISCHARGE CAPABILITY

DISCHARGE CAPABILITY header
Technical assistance

Tel. +33 (0) 3 66 74 00 89

tcbatiment.sgpam@saint-gobain.com

Calculate the slope

Calculate the slope

PAM DRAINAGE PIPE SYSTEMS

APPLICATION

For the dimensioning of rainwater and wastewater systems, the nominal sizes can be determined using the dimensioning tables in the appendix of DIN 1986-100. However, these tables only represent the discharge capacity of the smallest permissible inner diameter of the values specified in DIN EN 12056 values.

If the pipe material is known at the latest during the execution planning, the specific discharge capacities should be determined for a differentiated calculation on the basis of the actual internal diameter of the respective drainage pipe system should be used for a differentiated calculation.

Example of wastewater pipe Filling level h/d = 1.0 with slope 1 cm/m

DN

PAM-GLOBAL® drainage pipes

DIN 1986-100, A3

DIFFERENCE

100

3,0 l/s

2,5 l/s

+20%

125

5,3 l/s

3,9 l/s

+36%

150

8,5 l/s

7,7 l/s

+10%

Contact our sales team
CAPTCHA
2 + 13 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.
The data collected by SAINT-GOBAIN PAM is used to process your requests and to inform you about our offers and services. To find out more, see your data and your rights.
English