Infrastructure
Tel. +33 (0) 3 66 74 00 89
Description & Recommended use
Itinero® range is a solution that meets the high drainage technical demands of infrastructure projects.
PAM Building propose Itinero®, a devoted offer which takes into consideration the specificities of the project and guarantees excellent performances to accommodate different stress levels (weather constraints or exposures).
It is recommended to collect and drain surface water from bridges, tunnels and viaducts, on new build or renovation projects.
Dimensions : available in diameters 100mm to 600mm
Description & Recommended use
Itinero® range is a solution that meets the high drainage technical demands of infrastructure projects.
PAM Building propose Itinero®, a devoted offer which takes into consideration the specificities of the project and guarantees excellent performances to accommodate different stress levels (weather constraints or exposures).
It is recommended to collect and drain surface water from bridges, tunnels and viaducts, on new build or renovation projects.
Dimensions : available in diameters 100mm to 600mm
MAJOR BENEFITS
- Complied with EN 877 standard.
- Performances guaranteed with marks delivered by third party (NF).
- Long lifetime with high resistance to climatic stresses due to the zinc coating and the low thermal expansion coefficient of cast iron.
- Low maintenance due to the best in class resistance to shocks and crushing.
- High level of fire safety with the excellent reaction to fire A2, s1-d0.
- Suitable to many bridge and tunnel design and adapted to renovation projects.
- Easy to install due to mechanical couplings assembled with simple tools.
- We provide design recommendation, implementation of the discharge system and bill of quantity for your project: contact us at tcbatiment.sgpam@saint-gobain.com.
- 100% recyclable and made with 99% of recycled content.
COATINGS
Pipes :
- External coating: Grey (approximate RAL 7030), anti-corrosive epoxy coating, average dry film thickness of 80 µm.
- Cast-iron made with De Lavaud process.
- Anti-corrosive zinc coating of 260gr/m2 (about 40 µm).
- Internal coating: epoxy coating, average dry film thickness of 130 µm.
Fittings :
Externally and internally coated with a grey powder epoxy (approximate RAL 7030), to an average thickness of 300 µm.
COATINGS
Pipes :
- External coating: Grey (approximate RAL 7030), anti-corrosive epoxy coating, average dry film thickness of 80 µm.
- Cast-iron made with De Lavaud process.
- Anti-corrosive zinc coating of 260gr/m2 (about 40 µm).
- Internal coating: epoxy coating, average dry film thickness of 130 µm.
Fittings :
Externally and internally coated with a grey powder epoxy (approximate RAL 7030), to an average thickness of 300 µm.
CHEMICAL & CORROSION RESISTANCE
Hot water resistance : 24h at 95°C
Thermal cycle resistance: 1500 cycles between 15°C and 93°C
> Chemical resistance for 2 ≤pH ≤12
Salt spray resistance : more than 4500 h
PRODUCT MARKING
Pipes :
