Intensive use : PLUS RANGE
Tel. +33 (0) 3 83 80 78 08
About the solution
Description
High-performance cast iron pipes and fittings designed to withstand intensive use. Smartly designed to drain wastewater in above- and below-ground applications when exposed to hot and/or aggressive discharge. When installed below ground in aggressive environments it is highly resistant to external stresses.
Recommended use
The Plus range is the first choice for hospitals, laboratories and collective kitchens.
Dimensions
- Diameter: 50 to 400 mm (up to 600 mm on request)
- Length: 3000 mm.
About the solution
Description
High-performance cast iron pipes and fittings designed to withstand intensive use. Smartly designed to drain wastewater in above- and below-ground applications when exposed to hot and/or aggressive discharge. When installed below ground in aggressive environments it is highly resistant to external stresses.
Recommended use
The Plus range is the first choice for hospitals, laboratories and collective kitchens.
Dimensions
- Diameter: 50 to 400 mm (up to 600 mm on request)
- Length: 3000 mm.
MAJOR BENEFITS :
- Compliant with standard EN 877
- Performance guaranteed with marks delivered by a third party (NF, RAL-GZ, Kitemark, BBA, Sintef, Gost, Q+)
- Long-lasting operational safety thanks to the robustness and stiffness (around 700 kN.m) of cast iron and the use of flexible mechanical couplings
- High level of fire safety with excellent A2, s1-d0 reaction to fire and fire resistance up to 240 minutes depending on the configuration (generally requires no special fire protection, saving time and costs).
- Best acoustic comfort with Lsc,A < 10 dB (A) according to EN 14366
- Ease of installation due to mechanical couplings assembled with simple tools.
COATINGS :
Pipes :
- External coating: Grey, anti-corrosive acrylic primer paint, average dry film thickness of 40 µm.
- Anti-corrosive zinc coating of 130gr/m2.
- Cast-iron made with De Lavaud process.
- Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 250 µm.
Fittings :
Externally and internally coated with a grey powder epoxy to an average thickness of 250 µm.
COATINGS :
Pipes :
- External coating: Grey, anti-corrosive acrylic primer paint, average dry film thickness of 40 µm.
- Anti-corrosive zinc coating of 130gr/m2.
- Cast-iron made with De Lavaud process.
- Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 250 µm.
Fittings :
Externally and internally coated with a grey powder epoxy to an average thickness of 250 µm.
CHEMICAL & CORROSION RESISTANCE :
Hot water resistance : 24h at 95°C
Thermal cycle resistance: 1500 cycles between 15°C and 93°C
Chemical resistance for 2 ≤pH ≤13, up to 80°C.
Salt spray resistance : 2500h
ENVIRONMENTAL DATA
- Recycled content: 99%
- 100% Recyclable.
PRODUCT MARKING :
Pipes :
Fittings :
