Manifold Ensign Soil Short 100mm

Code article :

Technical infos & product description

Product description

Recommended use :

  • Domestic use
  • Fat Wastewater
  • Hot effluents
  • Hydrocarbon Wastewater
  • Rainwater
  • Runoff water
  • Industrial Wastewater

Major benefits :

The multi-connector DN100 allows the push-fit connection of three plastic or copper tube entries of external diameters (DE) 36 and / or DE 42. The DN150 allows the push-fit connection of three plastic or copper tube entries of external diameters (DE) 54 and / or DE 56. Installation instructions: The cut the appropriate groove shown on the rubber connection grommets. Remove the grommet and tear out the centre disk. Apply a small amount of silicone grease to the outside of the grommet and re-fit into the manifold ensuring that the retaining of the grommet is located correctly in the casing. Lubricate the pipe end and insert into the grommet with a rotational movement. Chamfering the waste pipe will ease the insertion. Any grommet not fitted with a waste pipe must also be removed any applied point 3.
  • Material :
  • Industry product standards : BS EN877
  • Range Fire Classification : Euroclass A1
  • Acoustic Performance : Cast Iron performance Best in class Lsc ≤ 10 dB(A) & LaA = 47 dB(A) according to EN 14366 with 2L/s
  • Percentage of Recycled Content : 97%
  • Recycling Information : Virtually 100% Recyclable