Manifold Multi-Waste Connector - DN150 - PAM GLOBAL S

Code article : 261434

Description

Part of the Standard drainage system, the PAM GLOBAL S multi-waste manifold is a connector capable of servicing six waste pipes at one time. The connector has an internal baffle to eliminate any cross-flow issues from the opposing waste inlets. Cast iron is coated with a reddish-brown epoxy film applied by cataphoresis.PAM GLOBAL S range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances.

Product variants

Article DN dn Angle Length Height Width Weight
261138 100 - - 445 582 445 12.8
261434 150 - - 445 591 445 17.3

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

Part of the Standard drainage system, the PAM GLOBAL S multi-waste manifold is a connector capable of servicing six waste pipes at one time. The connector has an internal baffle to eliminate any cross-flow issues from the opposing waste inlets. Cast iron is coated with a reddish-brown epoxy film applied by cataphoresis.PAM GLOBAL S range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances.

Recommended use :

  • Rainwater
  • Valve water
  • Wastewater

Major benefits :

The multi-connector allows the horizontal connection of up to six waste pipes - 3 either side, therefore can be used on soil stacks that service two back to back flats/apartments. The horizontal connections mean the waste pipes can be installed below the floor level to maximise space saving. The manifold contains and internal baffle allowing the use of all 6 waste inlets eliminating any cross flow. The manifold is supplied with 5 blanking plugs. Extended spigot capable of penetrating a floor slab depth of up to 400mm that eliminates the need for a joint in the slab. The spigot has 10mm increment markers to assist reducing the overall length to suit smaller slab depths

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance internal coating: more than 350 h.

Coating description :

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
  • Material : Cast iron
  • Industry product standards : NF EN877
  • Range Fire Classification : Euroclass A1
  • Acoustic Performance : Lsc,A < 10 dB(A) & La,A = 47 dB(A) according to EN 14366 with 2 l/s.
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is 100% recyclable through the existing recycling industrial network.
    Data source: Environmental Product Declaration S-P02013