Manifold Multi-Waste Connector - DN100 - PAM GLOBAL S
Description
Part of the Standard drainage system, the PAM GLOBAL S multi-waste manifold is a connector capable of servicing six waste pipes at one time. The connector has an internal baffle to eliminate any cross-flow issues from the opposing waste inlets. Cast iron is coated with a reddish-brown epoxy film applied by cataphoresis.PAM GLOBAL S range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances.
Product variants
No data available
Technical infos & product description
Product description
Part of the Standard drainage system, the PAM GLOBAL S multi-waste manifold is a connector capable of servicing six waste pipes at one time. The connector has an internal baffle to eliminate any cross-flow issues from the opposing waste inlets. Cast iron is coated with a reddish-brown epoxy film applied by cataphoresis.PAM GLOBAL S range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances.
Recommended use :
- Domestic use
- Fat Wastewater
- Hot effluents
- Hydrocarbon Wastewater
- Rainwater
- Runoff water
- Industrial Wastewater
Major benefits :
- The multi-connector allows the horizontal connection of up to six waste pipes - 3 either side, therefore can be used on soil stacks that service two back to back flats/apartments.
- The horizontal connections mean the waste pipes can be installed below the floor level to maximise space saving.
- The manifold contains and internal baffle allowing the use of all 6 waste inlets eliminating any cross flow.
- The manifold is supplied with 5 blanking plugs.
- Extended spigot capable of penetrating a floor slab depth of up to 400mm that eliminates the need for a joint in the slab.
- The spigot has 10mm increment markers to assist reducing the overall length to suit smaller slab depths.
Technical infos
- Hot water resistance: 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
- Chemical resistance for 2 ≤ pH ≤ 12.
- Salt spray resistance internal coating: more than 1500 h
Coating description
Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
- Material : Cast Iron
- Industry product standards : EN 877
- Range Fire Classification :
Euroclass A1
- Acoustic Performance : Lsc,A < 10 dB(A) & La,A = 47 dB(A) according to EN 14366 with 2 l/s.
- Percentage of Recycled Content : 97%
- Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
Data source: Environmental Product Declaration S-P-02013
