Special compensator short DN 250mm - SMU S

Code article : 185458

Description

The special compensators long of the SMU S range are accessories designed to absorb the relative movements between the pipe elements fixed at each end. Conditions of use : The motion compensator is connected to the network by two joints fitted with claw clamps. Configurations require the use of bidirectional anchor fittings. During assembly, the compensator must be fixed with a distance between its ends which must be equal to the assembly L value.

Product variants

Article DN dn Angle Length Height Width Weight
155050 75 - - 895 218 83 18.4
172638 100 - - 897 259 110 20.8
155067 125 - - 897 275 135 26
155072 150 - - 909 300 160 29.3
155077 200 - - 932 362 210 40.4
185458 250 - - 1143 444 274 83

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The special compensators long of the SMU S range are accessories designed to absorb the relative movements between the pipe elements fixed at each end. Conditions of use : The motion compensator is connected to the network by two joints fitted with claw clamps. Configurations require the use of bidirectional anchor fittings. During assembly, the compensator must be fixed with a distance between its ends which must be equal to the assembly L value.

Recommended use :

  • Rainwater
  • Valve water
  • Wastewater

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.
  • Adaptable to all configurations with available accessories connecting cast iron with other materials.
  • Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

  • Hot water resistance: 24h at 95°C. 
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C. 
  • Chemical resistance for 2 ≤ pH ≤ 12. 
  • Salt spray resistance internal coating: more than 350 h

Coating description :

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
  • Material : Cast-iron
  • Industry product standards : NF EN877
  • Range Fire Classification :
  • Acoustic Performance : Lsc,A < 10 dB(A) & La,A = 47 dB(A) according to EN 14366 with 2 l/s.
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is 100% recyclable through the existing recycling industrial network. 
    Data source: Environmental Product Declaration S-P-02013