1. Products
  2. Special fittings
  3. Special compensator long - DN150 - SMU S

Special compensator long - DN150 - SMU S

Code article : 155073

Description

The special compensators long of the SMU S range are accessories designed to absorb relative movements between the pipe elements fixed at each end. Conditions of use : The motion compensator must be connected to the network with claw joints and clamps (≤ DN200) or self-stopping HP joint (≥ DN300). All these configurations require the use of bidirectional anchor fittings. During installation the compensator must be fixed with a distance between its ends which must be equal to the installation L value with X = Y = Z = 0

Product variants Technical infos Documents BIM
Product Data/PDF

Product variants

Article number. DN DN Angle Length Height Width Weight
155051 75 - - 1794 218 83 25.60
155063 100 - - 1796 259 110 27.50
155068 125 - - 1796 275 135 33.00
155073 150 - - 1802 300 160 39.80
155078 200 - - 1824 362 210 55.60

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The special compensators long of the SMU S range are accessories designed to absorb relative movements between the pipe elements fixed at each end. Conditions of use : The motion compensator must be connected to the network with claw joints and clamps (≤ DN200) or self-stopping HP joint (≥ DN300). All these configurations require the use of bidirectional anchor fittings. During installation the compensator must be fixed with a distance between its ends which must be equal to the installation L value with X = Y = Z = 0

Recommended use

  • Rainwater
  • Valve water
  • Wastewater

Major benefits

  • Performances guaranteed with quality marks delivered by third party.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort. Easiness of installation due to mechanical couplings assembled with simple tools.
  • Adaptable to all configurations with available accessories connecting cast iron with other materials.
  • Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance internal coating: more than 350 h

Coating description

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
  • Material : Cast iron
  • Industry product standards : EN 877, CE, NF
  • Range Fire Classification :
    Euroclass A1
  • Acoustic Performance : ESA 5
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
    Data source: Environmental Product Declaration S-P-02013

Documents

Datasheet_SMU_S_-_Compensator_of_movement_-_Long_en-EX.pdf

BIM

See our BIM Library