Special compensator long DN 100mm - SMU S

Code article : 155063

Description

The special compensators long of the SMU S range are accessories designed to absorb relative movements between the pipe elements fixed at each end. Conditions of use : The motion compensator must be connected to the network with claw joints and clamps (≤ DN200) or self-stopping HP joint (≥ DN300). All these configurations require the use of bidirectional anchor fittings. During installation the compensator must be fixed with a distance between its ends which must be equal to the installation L value with X = Y = Z = 0

Product variants

Article DN dn Angle Length Height Width Weight
155051 75 - - 1794 218 83 25,6
155063 100 - - 1796 259 110 27,5
155068 125 - - 1796 275 135 33
155073 150 - - 1802 300 160 39,8
155078 200 - - 1824 362 210 55,6

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The special compensators long of the SMU S range are accessories designed to absorb relative movements between the pipe elements fixed at each end. Conditions of use : The motion compensator must be connected to the network with claw joints and clamps (≤ DN200) or self-stopping HP joint (≥ DN300). All these configurations require the use of bidirectional anchor fittings. During installation the compensator must be fixed with a distance between its ends which must be equal to the installation L value with X = Y = Z = 0

Recommended use :

  • Rainwater
  • Valve water
  • Wastewater

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.
  • Adaptable to all configurations with available accessories connecting cast iron with other materials.
  • Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

  • Hot water resistance: 24h at 95°C. 
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C. 
  • Chemical resistance for 2 ≤ pH ≤ 12. 
  • Salt spray resistance internal coating: more than 350 h

Coating description :

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
  • Material : Cast-iron
  • Industry product standards : NF EN877
  • Range Fire Classification :
  • Acoustic Performance : Lsc,A < 10 dB(A) & La,A = 47 dB(A) according to EN 14366 with 2 l/s.
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is 100% recyclable through the existing recycling industrial network. 
    Data source: Environmental Product Declaration S-P-02013