Offset bend - DN100 x 130 - SMU S

Code article : 155821

Description

Part of the Standard drainage system, the SMU S offset bend allows a change in position of the pipe run for those times you cannot plan a direct route fluid. The cast iron fittings are coated with a reddish-brown epoxy film applied by cataphoresis and are fully and indefinitely recyclable. PAM Building cast iron SMU S range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances. 

Product variants

Article DN dn Angle Length Height Width Weight
156386 50 - - 133 185 58 1.1
156478 75 - - 158 200 83 1.5
156482 75 - - 233 230 83 2.3
156596 100 - - 185 215 110 2.5
156604 100 - - 260 250 110 3.3
156602 100 - - 240 270 110 3.7
155821 100 - - 240 270 110 3.7
156759 125 - - 210 236 135 3.7
156764 125 - - 285 270 135 4.8
156853 150 - - 235 255 160 5.1
156858 150 - - 310 300 160 6.7
156972 200 - - 285 295 210 8.3
156976 200 - - 360 350 210 10.8

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

Part of the Standard drainage system, the SMU S offset bend allows a change in position of the pipe run for those times you cannot plan a direct route fluid. The cast iron fittings are coated with a reddish-brown epoxy film applied by cataphoresis and are fully and indefinitely recyclable. PAM Building cast iron SMU S range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances. 

Recommended use :

  • Valve water
  • Wastewater
  • Rainwater

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.
  • Adaptable to all configurations with available accessories connecting cast iron with other materials.
  • Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance: more than 350h.

Coating description :

  • External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

  • Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

  • Material : Cast-iron made with De Lavaud process
  • Industry product standards : NF EN877
  • Range Fire Classification : A1
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 97%
  • Recycling Information : 100% Recyclable