1. Products
  2. Branches
  3. Branch single Long tail 45° - DN100 x 100 - SMU PLUS

Branch single Long tail 45° - DN100 x 100 - SMU PLUS

Code article : 155381

Description

The long tail single branches of the SMU PLUS range are cast iron components, allowing the lateral connection of a pipe of the same DN, with the indicated angle and possible cutting area. The elongated shaft of the part allows: height adaptation to construction tolerances, 360° rotation to facilitate the positioning of the panty in relation to the location of the equipment, lower connection outside the slab for the interlocking of the parts or the installation of the joints thus eliminating accessibility problems, non-destructive interventions on slabs and ceilings during subsequent interventions.

Product variants Technical infos Documents BIM
Product Data/PDF

Product variants

Article number. DN DN Angle Length Height Width Weight
155381 100 100 45 238 430 110 5.30

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The long tail single branches of the SMU PLUS range are cast iron components, allowing the lateral connection of a pipe of the same DN, with the indicated angle and possible cutting area. The elongated shaft of the part allows: height adaptation to construction tolerances, 360° rotation to facilitate the positioning of the panty in relation to the location of the equipment, lower connection outside the slab for the interlocking of the parts or the installation of the joints thus eliminating accessibility problems, non-destructive interventions on slabs and ceilings during subsequent interventions.

Recommended use :

  • Fat Wastewater
  • Industrial Wastewater
  • Hot effluents
  • Domestic use
  • Rainwater
  • Wastewater
  • High pressure

Major benefits :

  • Performances guaranteed with quality marks delivered by third party.
  • Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 1 ≤ pH ≤ 13, up to 80°C.
  • Salt spray resistance: more than 2500h.

Coating description

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
  • Industry product standards : EN 877, CE, NF
  • Range Fire Classification :
    Euroclass A2-s1,d0
  • Acoustic Performance : Lsc,A < 10 dB(A) & La,A = 47 dB(A) according to EN 14366 with 2 l/s.
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
    Data source: Environmental Product Declaration S-P-02013

Documents

Datasheet_-_SMU_PLUS_-_Long_tail_single_branch_45.pdf

BIM

See our BIM Library