BLANK END - DN200 - PAM Global PLUS

Code article : 155287

Description

The Blank ends of the PAM Global PLUS range are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks.These fittings are coated internally and externally with an anthracite grey polymerised epoxy film applied by powder coating (300μm on average).

Product variants

Article DN dn Angle Length Height Width Weight
155287 200 - - 210 60 210 3.2

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The Blank ends of the PAM Global PLUS range are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks.These fittings are coated internally and externally with an anthracite grey polymerised epoxy film applied by powder coating (300μm on average).

Recommended use :

  • Fat Wastewater
  • Industrial Wastewater
  • Aggressive effluents
  • Hot effluents
  • Corrosive atmosphere

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

  • Hot water resistance : 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
  • Salt spray resistance : 1500h.

Coating description :

Coating: grey RAL 7015, epoxy, average dry film thickness 300 μm.
  • Material : Cast Iron
  • Industry product standards : DIN EN 877
  • Range Fire Classification : Euroclass A2-s1,d0
  • Acoustic Performance : Lsc ≤ 10 dB(A) & LaA = 47 dB(A) according to EN 14366 with 2L/s.
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is 100% recyclable through the existing recycling industrial network. 
    Data source: Environmental Product Declaration S-P-02014