Roof penetrator - DN100

Code article : 205924

Description

Part of the Standard drainage system, the SMU S penetrator enables ventilation through the roof.  This roof penetrator is following European regulations applicable in some countries only. Please check if the configuration is compatible with your country regulations. The cast-iron penetrator coated with a reddish-brown epoxy film applied by cataphoresis, is used with either EPDM or NBR 3mm thick gaskets.  

Product variants

Article DN dn Angle Length Height Width Weight
205922 75 - - 286 60 286 6.1
205924 100 - - 324 60 324 6.6
205925 125 - - 349 60 349 7.5

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

Part of the Standard drainage system, the SMU S penetrator enables ventilation through the roof.  This roof penetrator is following European regulations applicable in some countries only. Please check if the configuration is compatible with your country regulations. The cast-iron penetrator coated with a reddish-brown epoxy film applied by cataphoresis, is used with either EPDM or NBR 3mm thick gaskets.  

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance internal coating: more than 350 h.

Coating description :

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
  • Material : Cast iron
  • Industry product standards : EN877
  • Range Fire Classification : Euroclass A1
  • Acoustic Performance : Lsc ≤ 10 dB(A) & LaA = 47 dB(A) according to EN 14366 with 2 l/s.
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is 100% recyclable through the existing recycling industrial network. 
    Data source: Environmental Product Declaration S-P02013