Roof penetrator - DN100 - PAM-GLOBAL S

Code article : 205924

Description

Part of the Standard drainage system, the PAM GLOBAL S penetrator enables ventilation through the roof. This roof penetrator is following European regulations applicable in some countries only. Please check if the configuration is compatible with your country regulations.The cast-iron penetrator coated with a reddish-brown epoxy film applied by cataphoresis, is used with either EPDM or NBR 3mm thick gaskets.

Product variants

Article number. DN DN Angle Length Height Width Weight
205922 80 - - 286 60 286 6.10
205924 100 - - 324 60 324 6.60
205925 125 - - 349 60 349 7.50

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

Part of the Standard drainage system, the PAM GLOBAL S penetrator enables ventilation through the roof. This roof penetrator is following European regulations applicable in some countries only. Please check if the configuration is compatible with your country regulations.The cast-iron penetrator coated with a reddish-brown epoxy film applied by cataphoresis, is used with either EPDM or NBR 3mm thick gaskets.

Recommended use :

  • Roof drainage
  • Ventilation

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°Cand 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance internal coating: more than 350 h.

Coating description

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
  • Industry product standards : EN 877, CE
  • Range Fire Classification :
    Euroclass A1
  • Acoustic Performance : Lsc,A < 10 dB(A) & La,A = 47 dB(A) according to EN 14366 with 2 l/s.
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
    Data source: Environmental Product Declaration S-P-02013

Related products