Roof penetrator - DN125 - PAM-GLOBAL S
Code article : 205925
Description
Part of the Standard drainage system, the PAM GLOBAL S penetrator enables ventilation through the roof. This roof penetrator is following European regulations applicable in some countries only. Please check if the configuration is compatible with your country regulations.The cast-iron penetrator coated with a reddish-brown epoxy film applied by cataphoresis, is used with either EPDM or NBR 3mm thick gaskets.
Product variants
No data available
Technical infos & product description
Product description
Part of the Standard drainage system, the PAM GLOBAL S penetrator enables ventilation through the roof. This roof penetrator is following European regulations applicable in some countries only. Please check if the configuration is compatible with your country regulations.The cast-iron penetrator coated with a reddish-brown epoxy film applied by cataphoresis, is used with either EPDM or NBR 3mm thick gaskets.
Technical infos
- Hot water resistance: 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C
and 93°C. - Chemical resistance for 2 ≤ pH ≤ 12.
- Salt spray resistance internal coating: more than 350 h.
Coating description
Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
- Industry product standards : EN 877, CE
- Range Fire Classification :
Euroclass A1
- Acoustic Performance : Lsc,A 10 dB(A) & La,A = 47 dB(A) according to EN 14366 with 2 l/s.
- Percentage of Recycled Content : 99%
- Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
Data source: Environmental Product Declaration S-P-02013
Tutoriels & videos
BIM
Related products
Roof penetrator EPDM Gasket - DN125 - PAM-GLOBAL S
Roof penetrator NBR Gasket - DN125 - PAM-GLOBAL S