Single branch 88° - DN100 x 100 - AGILIUM
Code article : 283870
Description
Part of the standard range, the AGILIUM 88° single branch allows thejunction between two pipe runs at a 88° angle for conveying fluid waste andrainwater through buildings. The AGILIUM cast iron fittings weigh 15% less thanthose in the standard S range and their reduced dimensions allow space savings.The cast iron fittings are coated by cataphoresis and are fully andindefinitely recyclable. PAM Building cast iron AGILIUM range complies withEuropean standard EN 877 and has remarkable fire protection properties as wellas exceptional acoustic performances.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 283870 | 100 | - | - | 165 | 206 | 110 | 2,46 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
Part of the standard range, the AGILIUM 88° single branch allows thejunction between two pipe runs at a 88° angle for conveying fluid waste andrainwater through buildings. The AGILIUM cast iron fittings weigh 15% less thanthose in the standard S range and their reduced dimensions allow space savings.The cast iron fittings are coated by cataphoresis and are fully andindefinitely recyclable. PAM Building cast iron AGILIUM range complies withEuropean standard EN 877 and has remarkable fire protection properties as wellas exceptional acoustic performances.
Recommended use :
- Rainwater
- Wastewater
- Valve water
Major benefits :
- Performances guaranteed with marks delivered by third party.
- High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
- Best acoustic comfort.
- Easiness of installation due to mechanical couplings assembled with simple tools.
- Adaptable to all configurations with available accessories connecting cast iron with other materials.
- Limited maintenance operation thanks to technical and mechanical properties of cast iron.
Technical infos
- Hot water resistance: 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
- Chemical resistance for 2 ≤ pH ≤ 12.
- Salt spray resistance internal coating: more than 350 h
Coating description :
Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.- Material : Cast-iron
- Industry product standards : EN877, NF marking
- Range Fire Classification :
- Acoustic Performance :
- Percentage of Recycled Content : 99%
- Recycling Information : Cast iron is 100% recyclable through the existing recycling industrial network.
Data source: Environmental Product Declaration S-P-02013
Documents
No data available
Tutoriels & videos
No data available
