Pipe - DN125 X 3M - AGILIUM ZN
Code article : 288630
Description
AGILIUM® Zn pipes are part of the High performance range providing complete drainage solutions for transporting fluid waste and rainwater through buildings. High-quality AGILIUM® Zn cast iron pipes weigh 30% less than Standard pipes and are suitable for standard use applications.PAM Building cast iron pipes comply with European standard EN 877 and are manufactured using the De Lavaud process increasing the tensile strength and providing high crushing resistance.AGILIUM® Zn pipes have remarkable fire protection properties and have exceptional acoustic performances.By their material and design, our AGILIUM® Zn pipes are totally and indefinitely recyclable at the end of their life, without loss of property, our solution perfectly illustrates the principle of circular economy.
Product variants
| Article number. | DN | DN | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 292598 | 50 | - | - | 3000 | 58 | 58 | 10.50 |
| 288630 | 125 | - | - | 3000 | 135 | 135 | 25.10 |
| 288631 | 150 | - | - | 3000 | 160 | 160 | 30.90 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
Recommended use
- Rainwater
- Wastewater
- Standard use
- Corrosive atmosphere
Major benefits
- Performances guaranteed with quality marks delivered by third party.
- Resistance to climatic stresses thanks to the zinc coating, withstanding with extended exposure to ultraviolet light or wide temperature variation.
- High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
- Best acoustic comfort.
- Easiness of installation due to mechanical couplings assembled with simple tools.
Technical infos
- Hot water resistance: 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
- Chemical resistance for 2 ≤ pH ≤ 12.
- Salt spray resistance: more than 3500 h.
Coating description
- External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.
- Anti-corrosive layer: flame-applied zinc metal coating of 260g/m².
- Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.
- Industry product standards : EN 877, Kitemark, GOST, SINTEF, NF, Qplus prR 592012-3
- Range Fire Classification :
Euroclass A1
- Acoustic Performance : Lsc,A 10 dB(A) & La,A = 47 dB(A) according to EN 14366 with 2 l/s.
- Percentage of Recycled Content : 99%
- Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
Data source: Environmental Product Declaration S-P-02013
