Short Radius Bend DN 88° - DN400 - ITINERO
Code article : 277896
Description
Part of the range dedicated to infrastructure, the Itinero 88° short radius bend allows a change of direction of the conveyed surface water. Designed for bridges and tunnels, the cast iron fittings are coated with a thick grey powder epoxy layer and are fully and indefinitely recyclable.
Product variants
No data available
Technical infos & product description
Product description
Part of the range dedicated to infrastructure, the Itinero 88° short radius bend allows a change of direction of the conveyed surface water. Designed for bridges and tunnels, the cast iron fittings are coated with a thick grey powder epoxy layer and are fully and indefinitely recyclable.
Recommended use
- Aggressive outdoor environment
- Buried networks
- Hydrocarbon Wastewater
- Runoff water
Major benefits
- Long lifetime with high resistance to climatic stresses due to the zinc coating and low thermal expansion coefficient of cast iron.
- Low maintenance due to the best in class resistance to shocks and crushing. High level of fire safety with excellent A2, S1-d0 reaction to fire (non-combustible).
- Suitable for many bridge and tunnel designs and adapted to renovation projects. Easy to install due to mechanical couplings assembled with simple tools.
Technical infos
- Hot water resistance: 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C
and 93°C. - Chemical resistance for 2 ≤ pH ≤ 12.
- Salt spray resistance: more than 4500 h.
Coating description
Coating: grey RAL 7015, epoxy, average dry film thickness 300 μm.
- Material : Cast iron
- Industry product standards : EN 877, DIN 19522, GEG RAL-GZ 698
- Range Fire Classification :
Euroclass A2-s1,d0
- Percentage of Recycled Content : 99%
- Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
Data source: Environmental Product Declaration S-P-02013
