1. Products
  2. Bends
  3. Short radius Bend 45° - DN100 - AGILIUM

Short radius Bend 45° - DN100 - AGILIUM

Code article : 283867

Description

Part of the standard range, the AGILIUM 45° short radius bend allows a change of direction of the fluid waste and rainwater through buildings. The AGILIUM cast iron fittings weigh 15% less than those in the standard S range and their reduced dimensions allow space savings. The cast iron fittings are coated by cataphoresis and are fully and indefinitely recyclable.PAM Building cast iron AGILIUM range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances.

Product variants Technical infos Documents BIM
Product Data/PDF

Product variants

Article number. DN DN Angle Length Height Width Weight
283867 100 - - 139 149 110 1.20
285291 125 - - 167 175 135 2.10
285292 150 - - 194 197 160 3.01

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

Part of the standard range, the AGILIUM 45° short radius bend allows a change of direction of the fluid waste and rainwater through buildings. The AGILIUM cast iron fittings weigh 15% less than those in the standard S range and their reduced dimensions allow space savings. The cast iron fittings are coated by cataphoresis and are fully and indefinitely recyclable.PAM Building cast iron AGILIUM range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances.

Recommended use :

  • Rainwater
  • Domestic use
  • Valve water
  • High pressure
  • Wastewater

Major benefits :

  • Performances guaranteed with quality marks delivered by third party.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.
  • Adaptable to all configurations with available accessories connecting cast iron with other materials.
  • Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12 at room temperature.
  • Salt spray resistance internal coating: more than 350 h.

Coating description

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
  • Industry product standards : EN 877, NF, Kitemark, GOST, SINTEF, Qplus prR 592012-3
  • Range Fire Classification :
    Euroclass A1
  • Acoustic Performance : Lsc,A < 10 dB(A) & La,A = 47 dB(A) according to EN 14366 with 2 l/s.
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
    Data source: Environmental Product Declaration S-P-02013

Documents

Datasheet-EN-Agilium-Short-Radius-Bend-45.pdf

BIM

See our BIM Library