Short Radius Bend 45° - DN100 - PAM GLOBAL PLUS

Madde	DN	dn	Açı	Uzunluk	Yükseklik	Genişlik	Ağırlık
155201	50	-	45	84	106	58	0.6
176735	75	-	45	112	132	83	0.9
155236	100	-	45	142	158	110	1.6
155261	125	-	45	171	184	135	2.1
155277	150	-	45	199	210	160	3.4
155289	200	-	45	256	262	210	5.3

Tüm boyutlar mm ve nominal ağırlıklar kg cinsindendir.

Ürün açıklaması

The short radius bends of the PAM GLOBAL PLUS range are cast iron fittings allowing a change of direction of the fluid, with the indicated angle and possible cutting area. These couplings are coated internally and externally with an anthracite grey polymerized epoxy powder coating (300μm on average).

Önerilen Kullanım Alanları :

• Aggressive effluents
• Domestic use
• Fat Wastewater
• Hot effluents
• Industrial Wastewater
• Rainwater
• Runoff water

Başlıca faydaları :

• Performances guaranteed with marks delivered by third party.
• Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
• High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
• Best acoustic comfort.
• Easiness of installation due to mechanical couplings assembled with simple tools.

Teknik bilgi

• Hot water resistance : 24h at 95°C.
• Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
• Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
• Salt spray resistance : 1500h.

Kaplama açıklaması :

• External coating :
• Grey, anti-corrosive acrylic primer paint, average dry film thickness of 40 μm.
• Anti-corrosive zinc coating of 130gr/m2

• Internal coating : Two-component.

• Material : Cast-iron made with De Lavaud process
• Endüstri ürün standartları : DIN EN 877
• Yangın Sınıflandırması : A2-s1,d0
• Akustik Performans : Lsc ≤ 5dB(A) according to EN 14366
• Geri Dönüştürülmüş İçerik Yüzdesi : 97%
• Geri Dönüşüm Bilgileri : 100% Recyclable

Veri yok